PROTO-TECH RESEARCH LLC
  • Home
  • Products
    • Thermal Cycler >
      • Thermal Cycler References
    • Polymerization Stress Tester
    • Oral Wear Simulator >
      • Wear Simulator References
    • Automated Profilometer
    • Fatigue Cycler >
      • Fatigue Cycler References
    • Toothbrush Wear Simulator
    • Friction Tester
    • Shear Bond Strength Tester
    • LED Cure Dome
    • Plastometer
    • Coming Soon!
  • Services
  • Contact
  • Press

LED Curedome

Picture
Picture
Picture
Fulfill your vision in the dental laboratory with the newly-redesigned CUREDOME 23. Proto- tech has upgraded the LED CUREDOME with an array of super-strong LEDs housed in an attractive 3D printed enclosure. The result is a light curing chamber that cures faster and better than any halogen oven. The LEDs never burn out, and the CUREDOME 23 surrounds the dental appliance with an even, intense light that makes turntables obsolete.

Why does dental composite light curing have to be complicated and expensive? Halogen curing ovens overheat the materials, causing slumping and internal stresses. The bulbs burn out far too often and are expensive to replace. Fluorescent units are not bright enough and plasma units are too expensive.

LED curing is the best answer, so the CUREDOME  was developed to cure crowns and bridges completely. Veneers and varnishes cure quickly and thoroughly with no waste heat. The CUREDOME 23 cures any CQ-based composite or adhesive quickly and completely, at a price that is much lower than other light curing ovens.

Specifications:

  • Power: 110/220v AC, 800mW
  • Dimensions: 5.0 x 10.0 x 7.7” high
  • Weight: 1 lbs 8 oz with power supply
  • Chamber size: 4.0” diameter
  • Peak intensity region: 2.0” diameter
  • Maximum Intensity (est): 1000mW/cm2
Picture
Degree of cure measurements show the LED Curedome has more curing power than the Triad oven and cures nearly as well as the Demetron halogen handheld unit.
Picture
October 2024 Update: the LED Curedome now includes an LCD meter that displays a rating of the intensity setting for improved repeatablility.  

Picture

Spotlight on Research

In February 2018 in Acta Biomaterialia, Ye et al explored hybrid cross-linked polymers using the LED Curedome by Proto-tech.
Email us for more info & pricing

Copyright 2025 Proto-tech Research


  • Home
  • Products
    • Thermal Cycler >
      • Thermal Cycler References
    • Polymerization Stress Tester
    • Oral Wear Simulator >
      • Wear Simulator References
    • Automated Profilometer
    • Fatigue Cycler >
      • Fatigue Cycler References
    • Toothbrush Wear Simulator
    • Friction Tester
    • Shear Bond Strength Tester
    • LED Cure Dome
    • Plastometer
    • Coming Soon!
  • Services
  • Contact
  • Press